Why setup placement matters
A water leak sensor only helps if it is installed where water can reach it and connected to an app that will alert you. The iView S300 Water Sensor detects leaks from leaky faucets, pipe joints, or flooding basements and sends a push alert to your smartphone. The two practical steps are mounting the sensor in the right spot and pairing it with the iView Home app (via Smart Life or Tuya Smart).
Mounting the sensor
The S300 includes a clamp that screws into a surface. Choose a location where water is likely to pool first — next to a sink cabinet base, behind a toilet, near a water heater, or in a basement corner. The compact 2.64 × 2.64 × 0.94 inch body fits tight spaces. Secure the clamp with the supplied screws, then snap the sensor into the clamp.
- Where to place it: Position the 3-pin detection head so it contacts the floor or surface where water would collect. Avoid placing it where routine splashes from cleaning could trigger false alerts.
- Temperature and humidity limits: The sensor operates from 32 to 104°F (0–40°C) and 20–85% humidity. Do not install it in a freezer, direct sunlight, or a steam room.
Pairing with the app
The S300 uses a 2.4 GHz Wi-Fi connection (IEEE 802.11 b/g/n) with a wireless range of about 45 meters. It does not work with 5 GHz networks. Download the Smart Life or Tuya Smart app (the same app used for other iView smart devices), create an account, and follow the in-app pairing instructions. Once paired, you can test the sensor by touching the detection pins with a damp finger — the app should show a leak alert within seconds.
- App features: The app provides remote control, real-time push alerts, and the ability to manage multiple iView devices from one place. You can customize notification settings and receive security updates.
Sensor specifications at a glance
- S300 Water Sensor - Water Leakage Detection, Water Damage Prevention & Realtime Push Alerts: Battery: CR2 x 1; standby current 10 µA; standby time 5 years; use time 4 years (at 2 uses/month). The battery lasts years under normal use, but you should test the sensor after any power interruption or if the app stops showing the device online.

S300 Water Sensor - Water Leakage Detection, Water Damage Prevention & Realtime Push Alerts - S300 Water Sensor - Water Leakage Detection, Water Damage Prevention & Realtime Push Alerts: Wireless: 2.4 GHz 802.11 b/g/n, range 45 meters. The sensor must be within range of your 2.4 GHz router. If your router uses a combined 2.4/5 GHz SSID, check that the sensor connects to the 2.4 GHz band.
- S300 Water Sensor - Water Leakage Detection, Water Damage Prevention & Realtime Push Alerts: Protection Grade: IP67. The sensor is dust-tight and can withstand temporary immersion, but it is not designed for continuous underwater use. Mount it where it will detect water, not sit in it.
What the supplied information does not cover
The catalog does not specify whether the sensor can be placed outdoors or in a damp crawlspace beyond the stated temperature and humidity range. If your installation area regularly exceeds 85% humidity or drops below 32°F, the sensor may not perform reliably. For such locations, consider a wired or outdoor-rated leak detector instead.


