What You Need Before Starting
The iView ISW600 smart dimmer switch lets you control and dim lights from anywhere using the iView Home app, or by voice with Amazon Alexa and Google Assistant. Before you begin, confirm your home wiring matches the switch's requirements.
The ISW600 requires a neutral wire in the wall box and only supports single pole circuits (one switch controlling one light). It operates on 110-125VAC, 50/60Hz, with a maximum load of 500W for incandescent bulbs and 150W for LED bulbs. Installation should be performed by a professional electrician.
Tools and Checklist
- Neutral wire present: Check that a white neutral wire exists in the switch box. The ISW600 will not work without it.
- Single pole circuit: Ensure only one switch controls the light. Three-way or multi-switch setups are not supported.
- Wi-Fi 2.4GHz network: The switch connects only to 2.4GHz Wi-Fi. A 5GHz network alone will not work.
- iView Home app: Download the free iView Home app on your phone. No additional hub is needed.
Installation Steps
- Turn off power: At the circuit breaker, shut off power to the switch you are replacing. Use a voltage tester to confirm no live wires.
- Remove old switch: Unscrew and pull out the existing switch. Identify the line (hot), load, neutral, and ground wires.
- Connect ISW600 wires: Match the switch wires: black to line (hot), red to load (light), white to neutral, green to ground. Secure with wire nuts.
- Mount and restore power: Carefully tuck wires into the box, screw the switch in place, attach the faceplate, then turn power back on at the breaker.
- Pair with app: Open the iView Home app, create an account if needed, and follow the prompts to add the ISW600. The switch's LED display will show brightness level once connected.
Wiring and Safety Notes
The ISW600 includes short circuit and overload protection to reduce fire and shock risk. The switch is rated for 15A load current. Use only with dimmable LED or incandescent bulbs. Do not exceed 150W for LEDs or 500W for incandescent. The switch is not compatible with fluorescent or non-dimmable bulbs.
If you do not see a neutral wire or have a three-way switch setup, consult a licensed electrician. The supplied documentation recommends professional installation.
ISW600 Specifications at a Glance
- ISW600 Smart Dimmer WiFi Light Switch, Single Pole, Neutral Wire Required, Schedule, Timer INC/LED Lights, Compatible with Alexa and Google Assistant, No Hub Required: Voltage: 110-125VAC, 50/60Hz; Input: AC 120V – 60Hz Confirms compatibility with standard North American household circuits.

ISW600 Smart Dimmer WiFi Light Switch, Single Pole, Neutral Wire Required, Schedule, Timer INC/LED Lights, Compatible with Alexa and Google Assistant, No Hub Required - ISW600 Smart Dimmer WiFi Light Switch, Single Pole, Neutral Wire Required, Schedule, Timer INC/LED Lights, Compatible with Alexa and Google Assistant, No Hub Required: Load Power: INC 500W (Max), LED 150W (Max) Indicates maximum wattage for incandescent and LED bulbs; exceeding these may cause failure.
- ISW600 Smart Dimmer WiFi Light Switch, Single Pole, Neutral Wire Required, Schedule, Timer INC/LED Lights, Compatible with Alexa and Google Assistant, No Hub Required: Built-in Wi-Fi / No hub required Simplifies setup; no extra hardware purchase needed beyond the switch and app.
- ISW600 Smart Dimmer WiFi Light Switch, Single Pole, Neutral Wire Required, Schedule, Timer INC/LED Lights, Compatible with Alexa and Google Assistant, No Hub Required: Works with Alexa and Google Assistant Enables voice control without additional bridges or hubs.
After Installation: App and Voice Control
Once paired, you can dim lights remotely, set schedules and timers, and adjust brightness in 10 levels. The LED display shows the current brightness. Voice commands work through Alexa or Google Assistant after linking the iView Home skill.
Use schedules to turn lights on and off automatically while away, giving the appearance someone is home. The switch supports timer functions for added convenience.


